Lenze CS 9000 DVI Operating Instructions Instrukcja Użytkownika Pobierz pdf (Strona 29)

Mechanical installation

Mounting steps

Fixing the mounting frame to the support arm



BA_CS9000DVI EN 4.0

With add−on component







 

CS57x0−006

How to proceed:

1. Check support arm system for professional mounting and sufficient carrying

capacity.

– See support arm documentation.

2. Stick the self−adhesive seal  on the adapter plate  on the side with the threaded

bolts.

3. Pull the connecting cables  out of the support arm  and screw the adapter plate 

to the support arm .

– For screws see support arm documentation.

4. Screw the add−on component  to the threaded bolts of the adapter plate .

– 4 spacer bolts  on the inside/outside M5 x 20 mm

5. Stick the second self−adhesive seal  on the add−on component .

6. Screw the mounting frame  to the add−on component .

– 4 nuts M5 with washers Æ 5.3 mm

– 4 screws M5 x 8 mm with washers Æ 5.3 mm

Now you can connect the Command Station ( 33).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 52 53

Brak uwag

Lenze CS 9000 DVI Operating Instructions Instrukcja Użytkownika Strona 29