Lenze Loader L-force Loader Instrukcja Użytkownika Strona 17

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 45
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 16
L DMS 4.0 EN - 07/2007 17
L-force Loader
Operation
How to configure the communication settings
In the »L-force Loader«:
10. Select OptionsLECOM configurator to open the »LECOM configurator«.
In the »LECOM configurator«:
11. Click OK to confirm the Lenze OPC server LECOM info dialog box.
The configuration saved last will be loaded automatically.
12. Select the configuration entry for the interface (COMx) from the tree/list on the
left.
Check the interface settings in the Communication port tab (particularly, COM
number and baud rate) and adjust the settings, if necessary.
For a point-to-point connection via LECOM, mark the Scan at the server's start
option with a tick.
13. Select FileSave to save the configuration.
14. Select FileExit to exit the »LECOM configurator«.
The configuration is now complete and you can start searching for connected
devices in the »L-force Loader«.
Przeglądanie stron 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 44 45

Komentarze do niniejszej Instrukcji

Brak uwag