Lenze EVS9332xK Instrukcja Użytkownika Pobierz pdf (Strona 19)

100

101

Configuration

Basic configurations

2.2.1 Changing the basic configuration

2−5

EDSVS9332K−EXT EN 4.0

Profile data

Before commissioning, the profile data must be generated with the Global Drive Control program and

the transmitted to the drive. The below basic cam profiles are included in the Lenze setting. They are

effective independently of the basic parameter setting.

Profile 1 Electronic gearbox (linear position profile)

Profile 2 Forward / backward movement with a standstill in the apex of the motion

Profile 3 Forward / backward movement with a standstill at the end of motion

Profile 4 Smooth feed

Profiles 5 − 8 No motion

} Warning!

With Lenze setting, the motor must be operated at no−load (no mechanical

connection to the machine).

2.2.1 Changing the basic configuration

If the basic configuration must be changed for a special application, proceed as follows:

1. Select a basic configuration via C0005 which largely meets the requirements.

2. Add functions by:

– Reconfiguring inputs and/or outputs.

– Setting parameters for function blocks. (

 3−6)

– Inserting or removing function blocks. (

 3−12)

) Note!

If you change the signal flow of the basic configuration, e. g. by adding function

blocks, C0005 is set to 0. The display indicates "COMMON".

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 385 386

Komentarze do niniejszej Instrukcji

Brak uwag

Lenze EVS9332xK Instrukcja Użytkownika Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Lenze EVS9332xK