Lenze I/O system 1000 Instrukcja Użytkownika Pobierz pdf (Strona 16)

4 Mapping the real station structure in the »PLC Designer«

4.2 Configuring the I/O modules at the backplane bus of the L-force Controller

Lenze · I/O system 1000 · commissioning guidelines for the PLC Designer · DMS 1.2 EN · 11/2012 · TD05

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.2 Configuring the I/O modules at the backplane bus of the L-force Controller

The L-force Controller consists of the following components:

• I/O bus coupler module: controller with a PLC control in the form of a soft PLC.

• I/O compound modules: Up to 64 modules which are connected to the controller via the Lenze

backplane bus.

[4-1] Schematic hardware installation with added I/O compound modules

In order to be able to access the modules by means of a PLC program (reading input signals and

writing output signals), the real station layout, i.e. the physical arrangement of the I/O compound

modules in the device view of the »PLC Designer«:

[4-2] Example: Mapping of the physical topology (module 1 to module 7) in the device view in the »PLC Designer«

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Brak uwag

Lenze I/O system 1000 Instrukcja Użytkownika Strona 16