Lenze ETC Motion Control Instrukcja Użytkownika Pobierz pdf (Strona 169)

CNC programming

G functions

G functions individual descriptions

3.2

3.2.2

169

EDSTCXN EN 2.0

During the input, the text specified under F="..." is output and the desired

parameter accepted in the defined format. The input format and the display

position of the parameter is to be indicated at the desired position in the text

string with a format specification in accordance with the following rules:

%[flags][width][accuracy]type

Flags

<nothing> right−justified, leading blanks/zeros

− left−justified, subsequent zeros

+ always output sign (including +)

’ ’ only issue neg. sign

# for le, lE, lf : always output decimal point

for lg, lG: Always output decimal point but without following zeros

Width

0n min n−positions, preceding with zeros

n min n−positions, preceding with " "

Accuracy

<nothing> 6 positions at le,lE,lf

.0 le,lE,lf do not output a decimal point

.n max. n−decimal positions

Type

lf Floating point [−]dddd.ddd

le Floating point [−]d.ddd e[±]ddd

lg like le or lf; depending on accuracy automatic change−over of the display

lE like le, with "E" before the exponent

lG like lg, with "E" before the exponent

% the % character should be displayed

N10 G252 F="please enter value: %10.3lf [mm]" A0 C1024 P1024=500

The block N10 gets a new value for the parameter field 1024 (C) via the

display. The value must not be entered smaller than 0 (A). In the display, the

text appears at an internally defined position (not X and not Y).

Please enter value: 500 [mm]

The current value of P1204 is proposed as the input. The cursor (_) is

positioned on the position furthest right to the input field, which has a width

of 10 characters.

The input is completed when the ESC button or the ENTER button was

pressed and the current input value is within the defined area boundaries.

An input ended with ESC does not change the original value of the parameter

field. The program continues at any rate (no E programmed) with the block

after block N10.

Example

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 427 428

Komentarze do niniejszej Instrukcji

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Instrukcja Użytkownika Strona 169

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Lenze ETC Motion Control