Lenze PLC Designer R3-x Instrukcja Użytkownika Pobierz pdf (Strona 48)

Working with the sample projects

Sample project with "Table positioning" application - TablePositioning

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.2.6.4 Service mode

• Button  selects the service mode.

• Button  starts the motion profile.

• Button  inhibits the motion profile.

• Button selects clockwise rotation (clockwise rotating direction of the motor).

•Display field  indicates the status of the mode.

•Display field  indicates the current speed (variable Speed Value).

• Dialog box shows the status of the machine.

• Control field  shows the bus communication status.

• Control field Error indicates the error message status.

• Error in the application

• Error in the controller

•The Error Reset button resets the error messages.

 Select mode  Stop button Status of the service mode

Start button  Activate clockwise

rotation

 Actual speed

 Note!

If a bus communication error occurs, the control and drive controller are to be restarted,

since the sample application does not support an automatic reset of bus

communication.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 158 159

Brak uwag

Lenze PLC Designer R3-x Instrukcja Użytkownika Strona 48