Lenze EtherCAT Controller-based Automation Instrukcja Użytkownika Pobierz pdf (Strona 13)

Lenze · Controller-based Automation · EtherCAT® Communication Manual · DMS 6.4 EN · 04/2014 · TD17 13

2 Safety instructions

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2 Safety instructions

Observe the following safety instructions if you want to commission an inverter or a system with

the Lenze Controller.

 Read the documentation supplied with the system components carefully before you

start commissioning the devices and the Lenze Controller!

The system manual contains safety instructions which must be observed!

 Danger!

Risk of injury

There is risk of injury by ...

• unpredictable motor movements (e.g. an unintended direction of rotation, too high

speeds, or jerky movement);

• impermissible operating states during the parameterisation while there is an active

online connection to the device.

Possible consequences

Death or severe injuries

Protective measures

• If required, provide systems with installed inverters with additional monitoring and

protective devices according to the safety regulations valid in each case (e.g. law on

technical equipment, regulations for the prevention of accidents).

• During commissioning, maintain an adequate safety distance to the motor or the

machine parts driven by the motor.

 Stop!

Damage or destruction of machine parts

Damage or destruction of machine parts can be caused by ...

• unpredictable motor movements (e.g. an unintended direction of rotation, too high

speeds, or jerky movement);

• impermissible operating states during the parameterisation while there is an active

online connection to the device.

Possible consequences

Damage or destruction of machine parts

Protective measures

If required, provide systems with installed inverters with additional monitoring and

protective devices according to the safety regulations valid in each case (e.g. law on

technical equipment, regulations for the prevention of accidents).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 204 205

Brak uwag

Lenze EtherCAT Controller-based Automation Instrukcja Użytkownika Strona 13