Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Instrukcja Użytkownika Pobierz pdf (Strona 42)

Working with the ApplicationTemplate

Mapping the actual machine structure in the »PLC Designer«

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3. Allocate unique designations to the slaves inserted

(example: "L_94_HL_ActuatorSpeed").

The names can be selected freely and must …

•only

contain the characters "A ... Z", "a ... z", "0 ... 9", or "_";

•not

start with a digit.

You can enter a name by clicking the element.

Example:

4. Setting the cycle time

• The value for the EtherCAT master cycle time has to be defined according to the cycle

time of the quickest task.

• The icon in front of the respective device indicates the successful

EtherCAT communication.

Note: The EtherCAT cycle time is to be set to the quickest task cycle time set. In this

ApplicationTemplate, the quickest task cycle time is set to 2 ms, therefore 2000 μs have to

be set here.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 176 177

Brak uwag

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Instrukcja Użytkownika Strona 42