Lenze PLC Designer PLC Designer (R2-x) Instrukcja Użytkownika Pobierz pdf (Strona 368)

L-force | PLC Designer

The Resources

366 DMS 3.2 EN 02/2011 TD29 

Identification Station address (see 'Properties of the DP masters'), Station name (matches

device name, editable)

Activation Slave is active/inactive in current confi

uration. If activation is not selected,

configuration data will still be transferred to the coupler on Download, but

not data exchange occurs over the bus.

Watchdog If Watchdog Control is set active, the entered Watchdog time applies

(access monitoring, basis 10 ms). If the slave has not been accessed by the

master within this time, it is reset to its initialization state.

You can inspect the corresponding GSD-file via the GSD-file button.

In-/outputs of a DP slave

Dialog for configuring the in-/outputs of a DP slave

The way in which the configuration of a DP slave is done, depends on whether it is a

'modular' or a 'non-modular', 'fix' slave.

Lenze PLC Designer PLC Designer (R2-x) Instrukcja Użytkownika Strona 368